The battery powered stud welding unit LBSaccu 90s is designed for capacitor discharge stud welding with up to 200V charging voltage. The unit welds stainless steel studs up to M8 resp. Ø8 and steel studs up to M10 reliable in process. It can also be used with our gap stud welding gun PHM-1A, so that also aluminium and brass studs can be welded reliable in process.
The battery operation enables mobile use without electrical power supply. The integrated battery offers a very high capacity. With a life period of approx. 1000 charging cycles it is extremely long-lasting. Alternatively (e.g. when the battery is empty), the unit can be operated at every power socket.
The LBSaccu 90s is very light and very compact (195 x 302 x 270 mm). It convinces through easy operation and high welding quality. Through the electronically clocked inverter charging board short charging times and thus quick welding sequences are accomplished. The robust construction ensures high reliability and high power-on time. All functions are indicated by the high-grade LCD display. The charging voltage is continuously adjustable by the rotary knob on the front.
Max. welding diameter | Ø 10 mm |
Welding material | steel, stainless steel, aluminium, brass |
Capacitance | 88000 μF |
Charging voltage | 60 - 200 V |
Welding time | 1 - 3 mS |
Number of welds/battery charge |
M3/Ø3: 2800 |
Battery (capacity/voltage) | 2 x 7,5 Ah/12 V |
Battery life | 1000 charging cycles |
Battery charging time | 3 hours |
External power adapter (for charging/welding from mains) |
100 - 240 V, 50/60 Hz, 4000 mA |
Dimensions (B x L x H) | 195 x 302 x 270 mm |
Gewicht | 11,4 kg |
Article number | B-90-30-2054-1 |
Suitable welding guns | PKM-1B, PHM-1A, PIM-1B |
- lightweight
- low weight for high mobility
- small and compact
- dimensions: 195 x 302 x 270 mm
- LCD-Display
- easy to read
- display of adjusted charging voltage
- display of welds performed (welding counter resettable)
- display of welds still possible
- charging state indicator (colour changing of the display)
- very easy operation
- charging voltage continuously adjustable
- one-button operation by robust rotating pressure switch
- applicable with stud welding gun PKM-1b
- for welding threaded studs, non-threaded studs, internally threaded studs, earth plugs and insulation nails
- welding material: steel, stainless steel
- applicable with stud welding gun PHM-1A
- for welding threaded studs, non-threaded studs, internally threaded studs, earth plugs and insulation nails
- welding material: steel, stainless steel, aluminium, brass
- applicable with stud welding gun PIM-1b
- for welding cupped head pins
- welding material: steel, stainless steel
- powerful
- perfect welds of very high strength
- very high battery capacity
- long-lasting high-end lithium battery
- battery life approx. 1000 charging cycles!
- full battery charge from mains in only 3 hours
- easy, tool-less change of battery
- efficient energy management
- automatic stand-by mode (after 30 minutes)
- automatic shut-down (after 60 minutes)
- electronically clocked inverter charging board
- ensure short charging times and thus quick welding sequences
- ensure energy-efficient charging of capacitors
- mains operation
- Alternatively (e.g. when the battery is empty), the unit can be operated at every power socket.
- utmost safety
- electronic function control
- self-diagnosis system
- automatic function test
- repeat cycle lock to avoid welding on already welded studs
- battery deep discharge protection
- automatic switch-off in case of excess temperature
- protection of the unit in case of a fault on welding/control line cable and solenoid
- high quality, robust unit body for harsh building site conditions