CNC stud welding machine T1308025 (working area: 1300 x 800 x 250 mm) with three automatic welding heads and two operating speeds

(23/07/2025) The machine T1308025 is equipped with three automatic stud welding heads KHA-200F with integrated travel measuring system, three stud welding units PRO-C 1500 and three automatic stud feeders VBZ as well as one pneumatic single stud feeding.

Moreover, for the processing of earth plugs and double earth plugs, that cannot be fed through a feeding tube, the machine is equipped with a pick-up-station.

Each automatic stud welding head has a fluid spraying device to secure a high welding quality.

The machine is protected by two switchable light curtains and can therefore operate at two speeds. When protected by finger guards on the plexiglas enclosure, the machine operates at a speed of 0,2 m/s. When protected by hand guards on the safety fence, the machine operates at a speed of 0,5 m/s.

The complete working area - as for all our CNC stud welding machines - can be reached by each welding head. The machine has as a robust, welded steel machine frame with eight ceramic stop pins on the X and Y zero lines, the axes are driven through dynamic servo motors. The servo motor-driven Z-axis of 250 mm enables welding on different levels and the processing of different stud lengths without prior retooling.

The light curtains used to protect the working area enable very good accessibility and thus quick loading. With our operating software PRO-STUD (incl. DXF data converter) and monitor with keyboard and mouse (control PC with Windows 10) the machine can be easily handled even by unexperienced operators.

A brief description with photos of the machine can be found here.