CNC stud welding machine T10015025 (working area: 1000 x 1500 x 250 mm) (with videos)

(17/01/2024) The machine V10015025 is equipped with three automatic stud welding heads KHA-200F with integrated travel measuring system, three automatic stud feeders VBZ and three stud welding units PRO-C 1500.

Besides an automatic stud feeder the third welding head has a pneumatic single stud feeding with which special studs can be fed by hand. A fourth working lift for the adaption of a further automatic welding head is prepared. Each automatic stud welding head has a fluid spraying device to secure a high welding quality.

For the processing of earth plugs and double earth plugs, that cannot be fed through a feeding tube, the machine is equipped with a pick-up-station.

The complete working area - as for all our CNC stud welding machines - can be reached by each welding head. The machine has as a robust, welded steel machine frame with ten ceramic stop pins on the X and Y zero lines, the axes are driven through dynamic servo motors. The servo motor-driven Z-axis of 250 mm enables welding on different levels and the processing of different stud lengths without prior retooling. For an easy feeding of large and heavy metal sheets the machine is equipped with pneumatically lowerable ball casters.

For safeguarding the working area a one-sided safety fence and a three-sided light curtain are used so that the working area can be accessed very good and thus be loaded fast. With our operating software PRO-STUD (incl. DXF data converter) and monitor with keyboard and mouse (control PC with Windows 10) the machine can be easily handled even by unexperienced operators.

A brief description with photos and videos of the machine can be found here.